Use of the JURASSIC HOOK in wall climbing and aid climbing: The ICT JURASSIC HOOK model is a powerful, dual-purpose tool (combining a wall-climbing piton and hook). On difficult wall-climbing routes with extremely fine, hairline cracks, this piton is set with wall-climbing hammer blows inside the crack and creates a reliable pivot point for weighting on aiders. After passing the route, it's easily leveraged out with the help of a wall-climbing piton-puller (Nut Tool) without serious damage to the rock. Key features and engineering of the ICT JURASSIC HOOK: Hammer-drivi ...

The ICT African model nut tool is a practical, comfortable tool for pulling out various placed protection (nuts, cams, etc.) on wall climbing, traditional rock climbing, and canyoning ascents. Distinctive graphic design: features a laser-engraved African pattern with an attractive, distinctive look. Excellent reach: a thin design with a narrow, intelligent head for penetrating the deepest, tightest rock cracks. Multi-purpose: has hex sockets and wrenches at the end of the handle for tightening or loosening bolts on anchors and rappel plates. Maximum weight ...

The ICT Scorpion nut tool, inspired by an aggressive, ergonomic structure, gives the climber maximum maneuverability while cleaning a route. Ergonomic design and scorpion pattern: a scorpion-skin engraving with extra width at the hand-hold area for a better grip. Forked, serrated end: features a special head at the end of the handle for catching, leveraging, or loosening connections. High penetration into cracks: a standard hook and small head for quickly freeing stuck nuts in the deepest seams. High durability and optimized weight: a structure resistant t ...

The ICT Zebra model nut tool is a light, durable, highly practical option for rock climbing and canyoning programs that, with its linear structure, takes up minimal space on the harness. Linear design and zebra pattern: a beautiful Zebra pattern engraving on an elongated, modern body. Wide, multi-purpose handle: the end of the handle is designed as a rectangle, which, besides being comfortable to press with the palm, also serves as a spot to attach a strap or carabiner. Light and comfortable: long grooves on the body significantly reduce the tool's weight. H ...

Use of the MICRORAPTOR HOOK in wall climbing and aid climbing: The ICT MICRORAPTOR HOOK model is an intelligent combination of a wall-climbing piton and a hook. On difficult wall-climbing routes with extremely fine, hairline cracks where placing conventional gear isn't possible, this piton is set with hammer blows inside the crack and creates a reliable pivot point for aiding. After passing the route, it's easily leveraged out and removed from the rock with the help of a wall-climbing piton-puller (Nut Tool). Key features and engineering of the ICT MICRORAPTOR HOOK: Ha ...

Dual use of the OAK HOOK in wall climbing (driven and camming/torque): The ICT OAK model is a multi-purpose tool for tackling the hardest, most unpredictable wall cracks. This hook's special geometry lets the climber use it in two different modes: Driven mode: in narrow, fine cracks, the tool's edge is set deep in the rock seam with wall-climbing hammer blows. Camming/torque and inverted-jam mode: in cracks or rock erosions where hammer blows aren't possible, the hook is inserted horizontally or inverted into the crack, and by applying weight, creating torque, and leve ...

Multi-purpose use of the OAK HOOK set in wall climbing (driven and torque): The ICT Oak hook set, with two different edge types (narrow and wide) in various sizes, covers all a wall climber's needs for facing all kinds of rock cracks. This tool's 90-degree design allows two different placement methods: Driven mode (Piton Mode): in narrow, hairline cracks, the tool's hardened edge is set inside the rock seam with wall-climbing hammer blows. Camming/torque and inverted-jam mode (Camming / Torque Mode): in horizontal cracks, holes, or fragile rock where driving isn't poss ...

Dual use of the ANCHOR HOOK in wall climbing (driven and crack jamming): The ICT ANCHOR HOOK model, with its symmetrical anchor-shaped design, is a very stable, flexible tool on the wall. The special tips and angle of the anchor's branches let the wall climber choose the best placement method depending on the crack type: Driven mode: in fine, hairline seams and cracks, the tool's hardened branches are driven deep with wall-climbing hammer blows and set into the rock like a hook-shaped piton. Crack-jamming mode (Crack Jamming): in natural cracks with no need for driving ...

Use of the ANTELOPE HOOK in wall climbing and aid climbing: The ICT ANTELOPE HOOK model, inspired by a stable, delicate structure, answers routes where there isn't even the smallest crack to place gear. This hook, with its precise curved tip, sits easily on extremely narrow rock edges or drilled/natural holes (Bat Holes). Different shank lengths across three sizes let the wall climber choose the most precise tool based on the angle and amount of rock protrusion under the edge, and maintain their center of balance while loading on the aider. Key features and engineering of the ICT A ...

Use of FALCON HOOK in wall climbing and Aid Climbing: The FALCON HOOK model from ICT, inspired by falcon talons, is designed to overcome the toughest rock features on a wall. On routes where large rock bulges prevent regular hooks from seating properly, this hook's deep arch and long shaft allow it to bypass the rock feature and let the tool's sharp tip sit precisely on the narrow edges above the bulge. Its wide, broad base also creates exceptional balance and prevents tipping under load. Key Features and Engineering of the ICT FALCON HOOK: Deep Arch and Long Shaft (De ...

Use of ROCKET HOOK in wall climbing and Aid Climbing: The ROCKET HOOK model from ICT, with its large dimensions and long structure (between 10 and 20 cm), is designed to overcome large features and wide wall ledges that standard hooks cannot cover in depth. The tool's open mouth and deep upper arch allow the hook to fully encompass the rock feature, seating its sharp tip at the most secure upper point. The special design of the lower fins (rocket/tripod pattern) also allows the tool to rest against the rock surface and prevents rotation, lateral slipping, or deviation under the climber's ...

Use of STAND HOOK in wall climbing and Aid Climbing: The STAND HOOK model from ICT is a notable innovation in aid climbing tools. This hook's 3-pronged geometry allows the climber to select the best and most suitable tip depending on the type of rock feature (from very small, fingernail-sized edges to tiny holes). In addition to versatile engagement, the tool's three-dimensional form creates exceptional stability on the rock surface, since the two free arms resting against the rock act like a stand (wide base), fully neutralizing the lateral torques resulting from the climber's movement a ...

Short Summary Text Full Product Description and Use in Climbing and Drytooling Dual-Purpose Design (Hand + Ice Axe) for Training and Competitions: The Rainbow series by ICT was made to cover the training needs of climbers and drytooling athletes. Whether you're training for indoor climbing or preparing for drytooling competitions, the geometric form and surface texture of these holds are engineered to provide reliable hand grip while also showing exceptional resistance to impact and pick slippage. Key Features and Engineering of ICT ...

Simulating Real Wall Features and Improving Drytooling Precision: ICT Alloy Holds are an engineered solution for simulating real natural rock conditions in training and gym environments. In natural wall and drytooling climbs, the climber often encounters hairline cracks, tight seams, or delicate rock holes. This set of 20, precisely recreating these features from hard aluminum, challenges focus, balance, and hand/ice axe pick movement precision (Axes Precision) at a higher level. Key Features and Engineering of ICT Alloy Holds: Set of 20 with Diverse, Distinct Shapes: ...

Steel Strength and Unmatched Variety for Route Setters: ICT Metal Holds are specially engineered to meet the heavy demands of professional drytooling competitions and training. Unlike ordinary holds, this set's hardened steel structure shows no deformation, corrosion, or wear against repeated impacts and leveraging pressure from sharp ice axe picks. The high geometric variety of this collection allows the route setter to simulate all kinds of pick engagement techniques on the wall, from precise point holds to horizontal and vertical grooves, hooking, and torquing. ...

Fanciful, Distinctive Design of the Bubble Series for Competitions and Training: The Bubble series by ICT, with its spherical, bubble-like appearance, adds new variety and challenge to climbing walls. The special spherical geometry of these holds requires high precision in hand gripping and precise ice axe pick balance. This feature makes the Bubble series an excellent choice for designing competition routes, skill tests, and professional drytooling and climbing training. Key Features and Engineering of ICT Bubble Series Holds: Fanciful, Practical Set of 3: Includes 3 ...

Competitive, Specialized Design for Route Setters: The Ninja-turtles series by ICT, with its distinctive crescent-shaped geometry and all-steel structure, is engineered for precise ice axe pick engagement in advanced drytooling competitions and training. The ergonomic curve of the base and the grooves or edges at the hold's center are designed to invite the climber into precise balance challenges, leveraging, and locking the ice axe pick. The exceptional steel strength of this set ensures the holds show no deformation or wear against repeated impacts and lateral pressures from the ice axe ...

Unique, Unmatched Global Design for Route Setters: The Jeff series by ICT is considered an engineering masterpiece in the world of drytooling tools. The geometry of these 20 steel holds includes complex forms, angled holes, pins, three-dimensional grooves, and dome-shaped bases, designed for the first time in the world to precisely simulate the most difficult drytooling challenges. The all-steel structure of this collection guarantees absolute resistance to impact and intense pick leveraging, and its varied color coating gives route setters complete freedom to implement technical and comp ...

Special Design of the MARS Series for Competition and Professional Climbs: The Mars set of 15 by ICT is specially designed for competition settings and drytooling finals that require very hard, low-purchase holds. The special geometry and technical edges of the Mars series require the climber to demonstrate the most precise torquing angles, ice axe pick locking, and body balance. Its all-steel, hardened structure has absolute resistance against the most intense leveraging pressures and sudden pick impacts. Key Features and Engineering of ICT Mars Series Holds: Professi ...